Cara Limit Download Idm Di Mikrotik

Hello guys,I've searched on this forum and on google, i've found 100's of exemples how to do this but it seems to be that they are plenty ways to fix it, with lots of options that i don't have it clear. I hope that one of you can explain me the most simple way to limit the download and upload speed per IP address.Short story:- IP range is 10.0.0.0/24- IP of routerboard id 10.0.0.1- max downloadspeed per IP is 10Mbit- max uploadspeed per IP is 10Mbit- Port 1, 2, 3 are in a bridge called 'bridge1 - Bureau' (LAN)- WAN is port 6 called 'ether6 - Verixi'Thanks for any solution!!! I think that this isn't the correct solution, is this possible? When i do a speedtest with 2 pc's (at the same time) i have 5mbit up and 5mbit down on each. I want to limit the speed so that the maximum speed per ip is 10mbit, not in total for an interface. The uplink (WAN) is 1Gbit, I just don't want that my users download at 1Gbit.There are two ways to do that.i) add multiple queues (1 per IP).

(which doesn't seem like a good idea to me.)ii) define two new PCQs queue types. (1 for download & 1 for upload)I use winbox most of the times. So don't remember the exact cli commands.but in winbox. You'll have to go to Queues - Queue Types - Add(+)give it a name: say. 10M-Download, kind=pcq, rate=10M, Classifier=DstAddress. For rest defaults are OK.add another one:name = 10M-Upload, kind=pcq, rate=10M, Classifier=SrcAddress.Now go to 'simple queues' add a new one.name it whatever you want.

With target address being the subnet you want to apply limits on. (LEAVE UPLOAD/DOWNLOAD LIMITS TO UNLIMITED ON THIS TAB).and in advance tab of this queue, change the queue type to the one you've just created.Hit apply/ok and you're done.Post back for any clarifications. In the Simple Queue the upload/download max limit MUST be specified. This is the limit for ALL users.

The PCQ needs to know how much available bandwidth it has. In the PCQ Rate you specify limit per ONE user (maximal available data rate of each sub-stream).Example: If the max. Download limit is 10Mb, and you specify 3Mb in the PCQ Rate, every user will get max. 3Mb, even if in that moment the internet connection can give him more than that. If You type 0 in the PCQ Rate, PCQ will divide the 10Mb max. Limit equally between users.Read wiki for detailed explanation.For a precise PCQ queue behavior, I would suggest that You specify both - the max. Limit and the PCQ Rate limit(not 0).

Cara Idm Crack Download

I do not understand what us happening.I have the router with default configuration and I just add limits like you mentioned.I have only one bridge and this I put in 'target'.The limits is working great, metered with 3 devices.But sometimes it is not working and I can not see the traffic in queues exept some small kbps.I change the target from bridge and I put ip range 192.168.88.0/24 and is workind well.I remove the mikrotik from the wall and the limits is not working.I removed again and is working.What is happening??